Hauck Apollo Ultra Light Instructions página 10

Instructions of use
Scope of supply (fig. 1)
1. Assembly
Release transport safeguard.
Push pushchair forward to unfold. Pull slide bar up until you can hear and see
that both locking levers have engaged.
2. Mounting the front wheels (fig. 2)
Fit the swivel wheels to the front frame elements. Check that the locking
button has engaged and that the wheels are properly fixed.
3. Mounting the rear axle unit (fig. 3)
Fit the rear axle unit at the same time to the rear wheel fittings until the locking
button engages. Check that it is fixed properly to the pushchair.
4. Fixing the swivel wheels (fig. 4)
Press the locking lever down to fix the wheels. Pull the locking lever up for the
wheels to swivel again.
5. Mounting the hood (fig. 5)
Push the hood connectors to the fittings on the frame.
6. Mounting the front bar (fig. 6)
Press the button underneath the front bar guide and hold; insert the front bar.
Release the button to fix the front bar.
7. Adjusting the back rest (fig. 7)
The back rest is fully variable. Adjust the backrest by changing the setting of
the cord tie at the back.
10