Instructions Of Use - Hauck Shopper 6 Instrucciones De Montaje

Instructions of use

GB
1. Erecting
(fi g. 1)
Release transport safeguard
2. Unfolding
(fi g. 2)
Tip forward to open swivel wheels into position. Make sure that the wheels
have engaged. Check the tension!
3. Front wheel assembly
Push both front swivel wheels into position. Make sure the pushpin locks in
place and cannot pull off.
4. Rear wheel assembly
Push the wheel on the axle, fi x it with the holding plate and the split pin and
put on the hubcap (fi g. 5-7). Pull on the wheel to make sure it has been locked
in place.
Push both plastic brackets at the same time until they are locked onto the rear
legs (fi g. 8). Make sure the pushpin locks in the plastic housing hole securely.
5. Fix the front swivel wheels
Push the lever down to lock the swivel movement. To release the swivel
movement, slide the lever up.
6. Brake
Press the brake down, when you park the stroller. Push the stroller to check.
Attention: Always apply the brake when parking the stroller.
7. Back rest
(fi g. 10)
The back rest is adjusted via the pull belt with clasp which is located on the
rear part of the seat upholstery. This enables the inclination of the back rest to
be individually adjusted.
8. To adjust footrest
Press the buttons on both sides of the footrest to adjust to the desired position.
9. Safety restraint system
Place safety straps around child's waist and between legs. Connect buckles
together to lock. Adjust seatbelt as necessary.
Attention: Avoid serious injury from falling or sliding out, always use seat belt.
12
IM-HK-Shopper_6-04-04.indd 12
(fi g. 3)
(fi g. 4)
(fi g. 9)
(fi g. 11)
22.04.2004, 11:48:25