Publicidad
Idiomas disponibles
Idiomas disponibles
4.
While the pulley turns, force the belt off the
V-groove.
5.
Slide the belt off the engine pulley.
6.
Pull the belt down and out of the way.
7.
Push the belt forward and out the front of the
machine.
Installing the Belt
1.
Place belt in the transmission pulley groove.
2.
Gently pull the engine recoil rope to rotate the
engine pulley while forcing the belt into the
V-groove.
3.
Install the drive belt cover.
1. Bumper
2. Nut (4)
3. Washer (4)
Figure 30
4. Bolt (4)
5. Drive belt cover
4.
Install the dirt shield plate.
1. Nut (4)
2. Dirt shield
5.
Check the belt tension; adjust it as necessary.
g356422
20
Figure 31
3. Bolt (4)
g356418
Publicidad
