Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY PRECAUTIONS
Be sure to shut off electric supply at main switch
or circuit breaker before installation. The impor-
tant safeguards and instructions on this manual
are not meant to cover all possible conditions
and situation that may occur. It must be under-
stood that common sense, caution and care are
factors which cannot be built into any product.
These factors must be supplied by the person(s)
caring for and operating the unit.
No responsibility will be accepted for any dam-
age which may occur during transport or by
improper installation or voltage fluctuation or
if any portion of the porduct has been altered or
modified.
• If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or similar qualified person in order to
avoid a hazard.
• Never insert fingers, pencils or any other ob-
ject through the grille when the fan is running.
• Unplug the fan from the power socket when
moving it from one location to another.
• Unplug the fan from the power socket when
removing grilles for cleaning.
• Ensure the fan is standing on a stable surface
before operating.
• Do not place the fan close to an open window.
Rain splashing on the fan could cause an
electric shock hazard.
WARNING
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other.) As a safety feature,
this plug fits in a polarized outlet only one way. If the plug does not fit into the outlet,
reverse the plug and try again. If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
ELECTRICAL CORD
The cord of this appliance was selected to reduce the possibility of tangling in or tripping
over a longer cord. If more length is needed, use an extension cord rated no less than 15
amperes. When using an extension cord, do not let it drape over the working area or dangle
where someone could accidentally trip over it. Handle cord carefully for longer life; avoid
jerking or straining it at outlet and appliance connections.
2 English
• Do not plug the AC cord into the wall outlet
until fan has been completely assembled.
• Never operate the fan with a cracked or dam-
aged fan blade.
• To reduce the risk of fire or electric shock, do
not use the fan with a solid state speed control
device.
• For indoor use only.
• This product employs overload protection
(fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace
the fuse (see How To Replace Fuse for
instructions) following the product markings
for proper fuse rating. Check the product. If
replacement fuse blows, a short-circuit may be
present and the product should be discarded or
returned to an authorized service facility for
examination and/or repair.
• Do not run cord under carpeting. Do not cover
cord with throw rugs, runners or similar cov-
erings. Do not route cord under furniture or
appliance. Arrange cord away from traffic area
and where it will not be tripped over.
• Never pull or yank on the cord or the appli-
ance.
• Do not replace attachement plug. This con-
tains safety device (fuse) that should not be
removed, Discard product if the attachment
plug is damaged.
MORE PRECAUTIONS
• Use the fan only for purposes described in the
instruction manual.
• Use power source of the fan according to
electric nameplate under the base.
• To protect against electrical hazards, do not
wet, damp, immerse in liquid, or place this fan
near liquids.
• Turn unit off and unplug when leaving for an
extended period of time.
• Always turn the fan off and unplug before
cleaning.
• Do not store the fan where it can fall into
water or any other liquid.
• Store the fan in a cool dry place.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
11. Fan Pitch Adjustment
12. Plug & Wire
13. Switch
14. Fan Base
HOW TO REPLACE FUSE
1. Open fuse cover - slide open fuse access cover
on top of attachment plug towards blade.
2. Remove fuse carefully - turn fuse holder over
to remove fuse.
3. Insert new fuse.
4. Close fuse cover - slide close the fuse access
cover on top of attachment plug.
WARNING! Risk of fire. Replace with same
size and rated fuse.
PARTS
1. Front Grill
2. Cap
3. Blade
4. Nut
5. Rear Grill
6. Bolt
7. Shaft
8. Motor Cover
9. Oscillating Button
10. Motor Housing
English 3
Publicidad
