Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool's
operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly main-
tained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
h) Hold the device by the insu-
lated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring or its
own cord. Contact with a live wire
can also cause a charge in metal parts
of the device and result in an electric
shock.
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
a) Charge the batteries only in
chargers that are recommended
by the manufacturer. Risk of ire if a
charger that is suitable for a speciic type
of battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries may
result in injuries and risk of ire.
48
All manuals and user guides at all-guides.com
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or ire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into
eyes, seek medical assistance.
Leaking battery luid may cause skin
irritations or burns.
6) SERVICE
a) Have your power tool serviced
by a qualiied repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
7) SPECIFIC SAFETY INSTRUCTIONS
FOR POWER SCREWDRIVERS:
a) Hold the appliance by the in-
sulated handle grips when
performing work in which the
screw may come into contact
with hidden wiring or its own
power cord. If the screw were to
come into contact with a live electrical
cable, metal parts of the appliance
could also become live and cause an
electric shock.
8) SPECIAL SAFETY DIRECTIONS
FOR BATTERY-OPERATED TOOLS
a) Do not subject the battery to
strong sunlight over long pe-
Publicidad
