Nemox gelato 4K TOUCH Instrucciones Para El Uso página 4

Idiomas disponibles

IMPORTANT: This ice cream machine contains its own refrigerant which must be allowed to settle after transport. Leave the

ice cream machine on a horizontal surface for at least 12 hours after purchase or after any move which might have stored

the machine the wrong way up.

Leave at least 20 cm on each side of the machine to allow free air circulation. Make sure the ventilation grids are free and

unobstructed. It is normal for warm or hot air to flow from the air vents. The refrigeration process requires this.

A) Use with fixed bowl

1. Place the plastic inserts for use with fixed bowl

(letter "L" moulded) on the stainless steel mixing blade

B) Use with removable bowl

1. Pour in the fixed bowl about 1 measuring cup (H) of a salt

and water solution (per 100 cc. 20 g. of salt and 80 g. water)

or a spirituous beverage with a proof higher than 40 ° or food

alcohol.

2. Insert the removable bowl (G) into the fixed bowl,

by pressing down on the end. Lift it and CHECK THE

EXTERNAL WALL OF THE REMOVABLE BOWL IS

COMPLETELY WET. Without this operation, the machine

will not work optimally.

3. Place the plastic inserts for use with removable bowl

(letter "A" moulded) on the stainless steel mixing blade

4. Insert the mixing blade (B)

5. Screw the appropriate fixing knob for blade (C)

ATTENTION!: when using a saline solution, once you have finished using the machine, thoroughly

wash and dry both the fixed and removable bowls to prevent corrosion. Do not leave the saline

solution inside the bowl!

ENGLISH

The machine is ready for use

2. Insert the mixing blade (B)

3. Screw the appropriate fixing knob for blade (C)

OPTIONS OF USE