Ygnis Atlantic Guillot QAA 73 Manual Del Usuario página 45

7. WIRING FOR THE CONDENSINOX
• A double-insulated cable with a maximum Ø 5.5mm ext (diameter of 0.5 mm²) no longer
than 200 m is recommended.
• Cables come in through the back of the
boiler. Use the lower "other cables" wireway
to run the sensor cable (see diagram).
• Connect the wires to the OT terminals of
the 12-pin client terminal for non-power
cables (terminal connect to the LMU).
00MSA0081-D
Wireway for power
Wireway for other
cables (sensors/bus)
QAA 73 Space Heater Instructions
cables
page 45/48