9. STARTING
For the Modulo Control and Series G
• Close the front.
• Put the cover back on.
• Close the door.
• Turn on the power.
For Condensinox
• Close the left door and lock it with a ¼ turn of the screw.
• Close the right door.
• Turn on the power.
For Azurinox / Varfree
• Turn and reposition the control panel.
• Clip the front door back on and lock it with its two screws on the top.
• Turn on the power.
The instructions for using this ambient heating can be found in the attached operating
instructions and in the installation instructions for the boiler.
00MSA0081-D
QAA 73 Space Heater Instructions
page 48/48