EAS ELECTRIC ECRP86EKD Manual De Instrucciones página 64

Press (Swing) button to control the swing of the vertical louver of indoor unit (see Figure 6.8).
When the unit is on, the display icon shows the swing angle of the current louver.
(Swing) button, and the louver switches from the current angle to the angles in turn
Press
as shown in Figure 6.9.
Angle 1
When the louver is in "Auto" state,
the current operating angle, and the display icon will show the current angle of the louver after
10 seconds.
Note:
• The swing function is only available for indoor units configured with
• When the unit is off, the
turns off the swing function, and the display icon will no longer show the swing angle.
• This wired controller is unable to control horizontal swing in indoor unit.
4-5 Function Setting
Angle 2 Angle 3
Press
(Swing) button is invalid, and the wired controller automatically
Angle 4 Angle 5
Figure 6.9
(Swing) button
Figure 6.10
17
Auto Stop
again, and the louver will stop at
vertical louver.
V.2