Axxess AXDIS-FD3 Instrucciones De Instalación página 2

From the 16-pin harness to the aftermarket radio, connect the:
• Red wire to the accessory wire.
• Orange/White wire to the illumination wire (if applicable).
• Brown wire to the mute wire, only if equipped with SYNC (if applicable).
Note: If the mute wire is not connected, the radio will turn off when SYNC is activated.
• Gray wire to the right front positive speaker output.
• Gray/Black wire to the right front negative speaker output.
• White wire to the left front positive speaker output.
• White/Black wire to the left front negative speaker output.
The following (3) wires are only for multimedia/navigation radios that require these wires.
• Blue/Pink wire to the VSS/speed sense wire.
• Green/Purple wire to the reverse wire.
• Light Green wire to the parking brake wire
• Tape off and disregard the following (5) wires, they will not be used in this application:
Blue/White, Green, Green/Black, Purple, Purple/Black.
2
CONNECTIONS