Publicidad
Idiomas disponibles
Idiomas disponibles
Important Safety Instructions
1.
Save this manual for future reference
1.
This manual contains all safety, installation and operation instructions of the integrated HFP series solar energy
storage machine (inverter model)-inverter control.
2.
Read all instructions and precautions in the manual carefully before installing and using it.
3.
There is an unsafe voltage within the all-in-one power storage system. To avoid personal injury, users should
not disassemble the system themselves. If you need to repair the system, you should contact a rofessional
maintenance technician from our company.
4.
Do not place the system where children can touch it.
5.
Do not install the system in a moist, greasy, flammable, explosive, or dusty environment.
6.
The network input and AC output are high voltage. Do not touch the cable connection site.
7.
When the system is operating, do not touch the housing due to high temperature.
8.
Do not open the terminal cover when the system is operating.
9.
We recommend installing appropriate circuit breakers outside the system.
10.
Disconnect fuses or circuit breakers near the PV network, network, and battery terminals before installing or
adjusting system cables.
11.
After installation, check to see if all cables are properly connected to avoid the danger
of heat build-up caused by the virtual connection.
12.
The system is out of the network. Make sure the system is the only power input device for harging. Do not use
the system in parallel with other AC power supplies to avoid damage.
13.
Publicidad
