VITO PRO-POWER vikmf218a Manual De Instrucciones página 22

EN
Locating a sanding drum
1) Loosen the screw on the top of
the sanding drum holder.
2) Slide the sanding drum onto the
sanding drum holder.
3) Tighten the screw until the
sanding drum sleeve is secured.
22
Flexible Shaft
1) Remove the shaft collar.
2) Afloje la tuerca de pinza.
3) Raise the handle end of the fle-
xible shaft & shake gently until
the inner flexible shaft protrudes
from the fitting collar.
4) Insert the inner flexible shaft
into the collet then tighten the
collet nut.
5) Screw the flexible shaft fitting
collar onto the rotary tool.
6) Insert the hex key into the hole
on the handle.