Publicidad
Idiomas disponibles
Idiomas disponibles
EN
ACCESSORY GUIDE
TYPE
Collet
Mandrel
Screw Mandrel
Sanding Drum
Sanding Bands
Sanding Discs
Flap Wheels
Cutting Wheels
High Speed
Cutters
Engraving
Cutters
24
QTY/ SIZES INCLUDED
ASSEMBLY
1.5mm x 1
2.3mm x 2
3.2mm x 1
x 3
x 1
12.7mmx12.7mm x 1
6.35mmx12.7mm x 1
SANDING ACCESSORIES
12.7mmx12.7mm x 4
6.35mmx12.7mm x 8
180 Grit x 36
320 Grit x 36
80 Grit x 1
CUTTING ACCESSORIES
Regular Cut-off Wheels x 36
Heavy Duty Cut-off Wheels x 30
Fibreglass Cut-off Wheels x 5
x 2
x 5
APPLICATIONS
Used to fit a variety of
accessories, with different shank
sizes, to your rotary tool.
A mandrel is a shank to which
polishing accessories, cutting
wheels and sanding wheels can
be fitted.
A shank which screws into the felt
polishing tip and wheels.
A shank used with sanding paper
drums
Shapes wood, smoothes
fibreglass, sands inside curves
and other difficult to reach places.
Made to fit on a mandrel. They
can be used for nearly any small
sanding job you may have.
Grind and polish flat or contoured
surfaces. They are used most
effectively as a finishing sander after
heavier surface sanding and material
removal has been completed.
Thin discs of emery or fibreglass
used for slicing and cutting
applications. Use them for cutting
off frozen bolt heads and nuts etc.
Used in carving, cutting and slotting
in wood, plastics and soft metals
like aluminium. Good for free-hand
routing and precision cutting.
Made for intricate work on
ceramics, wood carvings, jewellery
and scrimshaw. Available in a wide
variety of shapes and sizes.
Publicidad
