Zizito REGINA Manual De Instrucciones página 13

ADJUSTING THE SHOULDER HEIGHT
The harness has 2 points. The straps should go into the slots or at the nearest
slots above the height of the child's shoulders.
Remove straps by passing them through the slots from the front to the back of
the seat to adjust the harness: re-route the straps through the appropriate slots.
NO – Too Low
THE ADJUSTMENT AND USE OF HARNESS
If the height of your shoulder belts in child car seat is not fit for your child, you
can adjust them. To adjust the height of the shoulder belts, please proceed as
12.
NO – Too High
follows:
Step 1: loosen the shoulder harness (see point below).
Step 2: Pull out the buckle tongues from the chest pad
and the slots on the cover and the shell, then thread
them into the corresponding belt slots.
Ensure that both of the shoulder belts go through slots
at the same height, and not twisted.
Certificate NO
E8
048867
YES – Correct
13