Zizito FONTANA II Manual De Instrucciones página 21

5.SEAT SELECTION AND ADJUSTMENT
5.1 Adjusting the car seat
Put the Cs128 on the vehicle seat, and the child's face
toward to the rear of vehicle driving direction. Ensures
that the bottom surface of the seat is flat to the vehicle
seat surface and the front of Cs128 just touch against
vehicle backrest surface.(fig.21)
Otherwise it is not ok.(fig. 22)
5.2 Seat installation.
The child restraint system Cs128 can be installed
in vehicles on any seat suitable for use in the listed
vehicles fitted with 3-point with retractor safety-belts,
approved to ECE regulation No. 16 or other equivalent
standards. (fig.23). And must not at any time be fitted
using only a 2 point lap belt.(fig.24)
If the car manufacturer allows child restraint systems
on the passenger seat, the seat should be moved to
the position furthest back.(fig.25).
We suggest always to install this child seat at the rear
seat of the vehicle. This will be more safe for your
child.
Important:
Check if the vehicle buckle has interference with child
seat, try to another seat.(If his is the case that can not
fix the seat well). Please contact our customer service
department if you have any doubt.
Always using the rear seats of your vehicle even if your
highway code permits the use on the front seat.
Check your highway code as this regulation may vary
according to he country. It is better to assemble your
seat at side pavement.
21