Wesco WS3160K Manual De Instrucciones página 14

MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you may
see sparks through the ventilation slots. This is normal and
will not damage your power tool.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
TROUBLESHOOTING
1. If your hammer does not start, check the plug on the
mains supply first.
2. If your hammer work efficiency is too low, please add
some grease in the grease box.
3. If your hammer use in low efficiency, please check
whether the tool is blunt.
4. If a fault cannot be rectified return the tool to an
authorized dealer for repair.
14
EN