Publicidad
Idiomas disponibles
Idiomas disponibles
Thermostat installation
1.
Remove the back of the thermostat.
2.
Fix the back of the thermostat to the
wall.
3.
Connect the main control board to any
of the three terminals AZ1, AZ2 o AZ3.
EN
4.
Fix the cables using the main control
board turrets.
5.
If
your
thermostat, insert the CR2450 button
battery.
6.
Place the display over the fixed support.
7.
Place the anti-vandalism rods (optional)
to better hold the thermostat in place.
Connection to the indoor unit
Follow the instructions on the gateway's
technical data sheet. Installation of the AC
unit's thermostat is recommended.
Other peripherals
Follow the instructions on their technical data sheet.
Important: For elements with external power supply at 110/230 VAC, it is only necessary to
connect poles "A" and "B" of the bus for communications.
10
thermostat
is
a
wireless
AZ1-AZ2-AZ3
AZ1-AZ2-AZ3
Indoor
unit
Publicidad
