Publicidad
Idiomas disponibles
Idiomas disponibles
The four LEDs in the controller start to flash slowly for 2 seconds, and then the
controller driver is automatically installed to the PC, after connect, LED1 and LED4
will flash slowly always, the controller can be used. Support for X-360 mode games.
The X-360 driver is available on the internet.
Note: With vibration function but without motion sensing function under X-360 mode
wired connection.
LED indication description
1) Four LEDs blinking quickly and circularly: This controller is searching for wireless
devices to be paired.
2) LED(s) solid bright: This controller is connecting to the console normally via wireless.
3) LED(s) blinking quickly: This controller battery voltage is lower than 3.6V; if the
voltage is lower than 3.4V, the controller will be shut off automatically and can't
be powered on.
4) LED(s) blinking slowly: This controller is connecting to the console via USB cable;
when this controller is being charged via connecting to a charger, four LEDs are
blinking slowly, and simultaneously, the four LEDs will be off after fully charged.
Controller parameter reference
Specification
Operating voltage
Operating current
Static current
Vibrating current
USB input voltage/current
Available distance
Battery voltage/capacity
Battery power-on time
Charging time
Static time
Net weight
Dimension
Packing list
Remark: The above parameters are for references only, they are subject to
the actual product.
DC 3.7V-4.2V
20-30mA
20-80uA
50-150mA
DC 5.0V/500mA
≤10m
3.7V / 600mAh
Around 8 hours (fully charged)
Around 2-3 hours
Around 30 days
191g (225g including a charging cable and a
user guide)
151*107*62mm
1 x controller, 1 x charging cable, 1 x user guide
04
Publicidad
