Dometic Mini Heki Style Instrucciones De Montaje Y De Uso página 8

Using the Mini Heki Style
See fig. b
1. Push the inner frame onto the mounting frame.
2. After installing, check the roof light works properly.
I
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
3. Remove the protective film from the acrylic glass.
4. If necessary, enter the new vehicle height and weight in the vehicle documents.
8 Using the Mini Heki Style
Opening and closing the Mini Heki Style (fig. c)
8.1
➤ Press the release button (1) and open the roof hood with the bracket at the same
time (2).
Opening the roof light completely
➤ Slide the bracket (2) into the I position.
Opening the roof light to the half-way position
➤ Slide the bracket (2) into the II position.
You can push down the sliders (3) on the left and right to lock it.
Opening the roof light to the ventilation position
➤ Slide the bracket (2) into the III position.
Closing the roof light
1. Slide the bracket (2) into the IV position.
2. Guide the bracket (2) with slight pressure to the left and right via the catches (4),
so that the roof hood is locked and the bracket (2) is on the release button (1).
8
Mini Heki Style
EN