Publicidad
Idiomas disponibles
Idiomas disponibles
2.4.
Safe use of the device
a)
Do not overload the device. Use tools that are suitable for the given
application. A correctly selected device ensures better and safer performance
of work.
b)
Do not use the device if the ON/OFF switch does not function properly (does
not switch on and off).
c)
The device must be disconnected from the power supply before adjustment,
cleaning and maintenance. This preventive measure reduces the risk of
accidental activation.
d)
Keep unused devices out of the reach of children and anyone not familiar with
the device or these instructions. Devices are dangerous in the hands of
inexperienced users.
e)
Keep the device in good working order.
f)
Keep the device out of the reach of children.
g)
Repair and maintenance of the device should be carried out by qualified
persons using only original spare parts. This will ensure a safe use of the device.
h)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen any screws.
i)
When transporting and moving the device from the place of storage to the
place of use, follow the health and safety regulations for manual transport that
apply in the country in which the device is used.
j)
Avoid situations where the device stops under heavy load during operation.
This can cause overheating of the drive elements and subsequent damage to
the device.
k)
Clean the device regularly to prevent the permanent accumulation of dirt.
l)
The device is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
m) It is forbidden to tamper with the device in order to change its parameters or
construction.
n)
Keep the device away from sources of fire and heat, direct sunlight and
moisture.
o)
Exceeding the maximum permissible user weight may cause damage to the
product.
p)
Do not sit at the end of the chair. This may cause the product to fall over.
q)
The weight must be distributed evenly on the chair to avoid it tipping over.
r)
Do not stand on the chair.
s)
Check from time to time that the screws have not come loose. Tighten if
necessary.
t)
Regularly lubricate the moving parts of the device which are used to adjust the
position.
Publicidad
