Publicidad
Idiomas disponibles
Idiomas disponibles
2. Lift the spring to return the footrest to its original position.
3.3.3.
Ending work with the device:
a) When finished working, switch off the device using the ON/OFF switch.
b) Remove the mains plug from the power socket.
3.4. Cleaning and maintenance
a)
Before cleaning and when the device is not in use, pull the power supply plug.
b)
Use only non-corrosive agents for cleaning the surface.
c)
Store the device in a dry and cool place protected from moisture and direct
sunlight.
d)
Do not spray the device with a stream of water and do not immerse it in water.
e)
Regularly inspect the device for technical failure and damage. If necessary,
replace worn parts.
f)
Use a soft, damp cloth for cleaning.
g)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or metal
scraper) as these may damage the surface of the device.
h)
Do not clean the device with oily substances.
Publicidad
