physa ROME Manual De Instrucciones página 27

3.3. Working with the device
3.3.1. Starting the device:
a) Unpack the device, remove the foil. Check that the device is not damaged.
b) Insert the end of the remote control cable into the socket on the device [1].
c) Insert the end of the power cord into the socket on the device [2].
d) Plug the plug of the power cord into an electrical outlet.
e) Use the ON/OFF switch [3] to switch the device on (switch to "I" position).
3.3.2. Description of the remote control functions:
The positions of the device are adjusted using the remote control. Each button is
responsible for a different control function.