Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
4. Reinsert the blower and bracket assembly
into the top vent and screw in the 4 previously
removed screws into the back of the fireplace
cabinet.
5. Route the blower cord through the race way.
Electrical Box: (Electricity and outlet must be
installed prior to installing the blower. Installing a
single pole switch is recommended.) Plug blower
in here.
GREEN
BLACK
BLOWER
WHITE
IF ANY ORIGINAL WIRING SUPPLIED
WITH THIS HEATER MUST BE
REPLACED, IT MUST BE TYP AWG
105C WIRE OR ITS EQUIVALENT
EXCEPT AS INDICATED.
6. Reassemble top grill (if frame is not already
removed).
FOR ALL FIREBOXES: PHZC32C, PHZC36C, PHZC42C or PHZCI28LP, PHZCI28NG,
PHZCI32LP, PHZCI32NG:
7. To use the blower, plug it in. If you've installed a single pole switch, flip the switch to turn
it on. If you don't have the switch, as soon as it is plugged in, it will begin to blow.
8. To shut off the blower, flip the switch to off. Or, if you don't have a switch, unplug the unit.
BLOWER WIRING DIAGRAM
4
Screws
5
Install a NEMA 5-15R
receptacle for power supply
6
BLOWER MOUNTING LOCATION
7
raceway
BLOWER MOUNTING
Publicidad
