Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE OF MOTORS
WARNING: Make sure all power to the appliance is turned OFF
before proceeding.
Always disconnect the appliance from the main power supply and allow it to cool
before any servicing operation. The motor used on the blower is pre-lubricated
for extended bearing life and requires no further lubrication. However, periodic
cleaning/vacuuming of the appliance around the air intake and exhaust, as well
as the blower is recommended. For heavy or continuous use, periodic cleaning
must be done more frequently. If the heater blows alternating cold and warm
air, check the blower for free movement and for debris restricting air flow. If the
blower does not move freely, the unit must be turned off and the blower replaced
immediately in order to prevent further damage to the unit.
Troubleshooting
PROBLEM
Blower is not
spinning.
Blower is
making a loud
noise.
This product includes a warranty against any defect in materials and
workmanship for a period of one (1) year from the date of retail sale. Contact our
Consumer Warranty Dept. for more information (800) 776-9425.
POSSIBLE CAUSE
1. There is no power to
the blower.
2. Blower motor is bad.
1. Blower housing or
blades are dirty.
2. Blower rotation is
blocked.
3. Defective blower.
CORRECTIVE ACTION
1. Remove and change "Replace
blower" to #1.
2. Replace blower.
1. Clean blower and blower
housing.
2. Verify wiring is not in blower
path.
3. Replace blower.
8
Printed in China
Publicidad
