Product Specifications; Maintenance Schedule - Craftsman 580.752360 Manual Del Operador

PRODUCT S PECIFiCATiONS
Pressure Washer Specifications
Pressure ..................... 3,000 PSI
Flow Rate ..................... 2.8 GPM
Detergent Mix ................. Use as directed
Water Supply Temperature ....... Not to exceed IO0°F
Pump Oil Capacity.............. 9.6 fl. oz. (0.28 I)
Engine Specifications
RatedHorsepower ............... 6.5 at 3600 rpm
Bore .......................... 2.7 in. (68 ram)
Stroke ......................... 2.1 in. (54 ram)
Displacement ................... 12.0 in. (196 cc)
Spark Plug
Resistor .................... NGK BPR6ES
Set GapTo: ................... 0.028-0.031 in (0.70-0.80
mm)
IntakeValveClearance ............ 0.15 _+ 0.02 mm (cold)
ExhaustValveClearance ........... 0.20 _+ 0.02 mm (cold)
FuelCapacity ................... 0.95 Gallons
Oil Type ....................... SAE10W-30
This pressure washer is rated in accordanceto the Pressure
Washer Manufacture Association (PWMA) standard PW101
(Testing and Rating Performance of Pressure Washers).
OWNER'SRESPOHSIBILITIES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
Maintenance Schedule
* Changeengine oil
. Check/clean water inlet screen'
. Check high pressure hose
. Check detergent siphoning hose
. Check spray gun and assembly for leaks
. Cleandebris
. Check air filter
. Check engine oil level
(rrr i,,}'3}[3 L}: iii iiiii iiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
* Cleanair filter 2
ii}i iiiiiii[,,f[',', ;; id} 3J'}_i i }ij[':,_}} :[[J J 11111111111111111111111111111111111111111111111111111111111
. Changeengine oil
* Cleansediment cup
* Check/adjust spark plug
. Service spark arrester'
* Cleanfuel tank and filter
. Change pump oiP
}
. Replaceair filter _
. Replacespark plug
. Check adjust idle speed_
. Check adjust valve clearance _
f
. Cleancumbustion chambed
. Checkfuel tube (replace if necessary) _
Clean if clogged. Replace if perforated or torn.
2 Service more often under dirty or dusty conditions.
Replace paper element only.
4 These items should be serviced by your servicing dealer.
s Change after first 50 hours of operation and then every 200 hours or 3 months,
whichever occurs first.
14