Descargar Imprimir esta página

Segway GT1P Manual Del Producto página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
EN
Item
Input Voltage
Max. Output Voltage
Charger
Output Power
Rated Output
Type
Tire Pressure
Tire
Material
Speed Modes
Others
Suspension System
Brake System
[1]: Theoretical Range: tested while riding with a full battery, 75 kg (165 lbs) load, 25°C (77°F), at the speed of 12.4 mph (20
km/h) on average on pavement.
[2]: Typical Range: tested while riding with a full battery, 75 kg (165 lbs) load, 25°C (77°F), at the speed of 24.9 mph (40 km/h)
on average on pavement.
* Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
07
Parameter
100–240 V~
58.8 V
0.1 kW, 115.6 W
57.8 V
2.0 A
11-inch Self-sealing tubeless tires
32 psi
Rubber
WALK mode, PARK mode, ECO mode, SPORT mode and RACE mode
Front and rear spring suspension
Front and rear adjustable damper
Front & Rear disc brakes
Common Failures and Solutions
3
Error code
Possible causes
Throttle abnormality
0
Dashboard communication failure
1
2
Battery communication failure
3
Turn signals abnormality
4
Headlight abnormality
5
Water dectection in stem top
Over-voltage protection of motor
6
controller
Under-voltage protection of
7
battery/motor controller
High scooter temperature
8
High battery temperature
9
Low battery temperature
10
High front-drive-wheel temperature
11
Front-drive-wheel stall
12
13
Front-drive-wheel current sensor error
Front-drive-wheel over-current
14
15
Front-drive-wheel motor phase failure
High rear-drive-wheel temperature
16
17
Rear-drive-wheel stall
18
Rear-drive-wheel current sensor error
19
Rear-drive-wheel over-current
20
Rear-drive-wheel motor phase failure
21
Rear motor hall sensor error
22
Front motor hall sensor error
Solution
Please contact after-sales service or an authorized dealer.
Please try to charge the scooter.
Please try to apply heat dissipation for the scooter.
Please try to apply heat dissipation for the scooter.
Please try to warm up the scooter.
Please try to apply heat dissipation for the front-drive-wheel.
Please restart the scooter and try again.
Please contact after-sales service or an authorized dealer.
Please restart the scooter and try again.
Please contact after-sales service or an authorized dealer.
Please try to apply heat dissipation for the rear-drive-wheel.
Please restart the scooter and try again.
Please contact after-sales service or an authorized dealer.
Please restart the scooter and try again.
Please contact after-sales service or an authorized dealer.
EN
08

Publicidad

loading

Este manual también es adecuado para:

Gt2p