Lindy 38396-7 Manual De Usuario página 7

User Manual
2. Set the PC's IP address to 169.254.100.100 and the Subnet mask to 255.255.0.0.
3. Install a bonjour protocol checking tool (such as zeroconfServiceBrowser) on the PC to find the
IP address of the Encoder. After opening the software, you can select "Workgroup Manager" in
Services of Browser, select the Host name in Service-Instances, and find the IP address in the
Address item in of Instance-Info.
Notes:
- The window in the lower left corner displays the Host names of all SS devices in the current
network.
- The window in the lower right corner displays the Host name, IP address and Port number of
the selected SS device.
- The Host name of Encoder starts with AST-ENC; the Host name of Decoder starts with AST-
DEC; the Host name of Encoder Secondary Stream chip (SS) starts with SS-ENC. The Host
name of Encoder contains the Host name of the Encoder Secondary Stream chip (SS).
4. Set the PC's IP address to the same network segment of the IP address of the Encoder
Secondary Stream (SS).
English