Bestron BREAKFAST CLUB ATS400Z Manual Del Usuario página 10

OPERATION
The appliance is intended only for domestic use, not for professional use.
The following description is associated with the image on page 2:
1. Housing
3. Stop button
5. Power cord and plug
7. Bread carriages
OPERATION - Before first use
Operate the toaster a couple of times, without bread, at the maximum setting (setting 6). This will remove
the last traces from the manufacturing process. A little smoke and odour may be emitted by the toaster when
it is used for the first time.
OPERATION - Preparation
1. Put the appliance on a stable and flat surface.
2. Put the plug (5) into the wall socket.
OPERATION - Toasting bread
1. Adjust the temperature and the toasting time with the temperature-control dial (4).
a. The temperature is lowest at setting 1, and the toasting time is the shortest.
b. The temperature is highest at setting 6, and the toasting time is the longest.
c. In the event of doubt, always begin at a lower setting.
d. Older bread will need to be toasted at a lower setting than fresh bread.
e. Brown bread will need to be toasted at a higher setting than white bread.
2. Put two slices of bread in the toaster's bread carriages (7).
3. Lower the slices of bread by pressing the bread carriages lever (6) downwards until it locks into place.
The appliance will now start toasting the bread; it will automatically switch off once the toast is ready.
The slices of toast will rise automatically.
4. Remove the toast from the toaster.
5. Remove the plug from the wall socket.
6. Allow the toaster to cool down before storing it.
WARNING:
• The bread will emit smoke if the temperature is adjusted to too high a setting. If this happens, press the
stop button (3) to stop toasting the bread.
• If toast remains caught in the toaster, then you should remove the plug (5) from the wall socket and allow
the toaster to cool. You can now carefully remove the toast from the toaster. Do not use sharp and/or
metal implements.
CLEANING AND MAINTENANCE
1. Remove the plug from the wall socket, and allow the appliance to cool.
2. Take the crumb tray (2) out of the appliance (see figure 2) , and remove any breadcrumbs.
3. Clean the exterior of the appliance with a damp cloth, and dry with a clean cloth. Make sure no moisture
gets into the appliance.
4. Slide the crumb tray back into the appliance.
WARNING:
• Never immerse the appliance, plug or power cord in water. Never put the appliance in a dishwasher.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
SERVICE
If an unexpected problem occurs, please contact the BESTRON service department:
www.bestron.com/service
2. Crumb tray
4. Temperature-control dial
6. Bread carriages lever
10
EN