ATH-Heinl 55HAP Manual De Instrucciones página 117

4.3 Maintenance or care plan
Note
The machine must be serviced, cleaned and maintained at regular intervals, regardless of how
dirty it is.
The machine must then be treated with a care product (e.g. oil or wax spray). Do not use
cleaning agents that are harmful to the skin.
If the mentioned points are not fulfilled, the warranty claim expires!
Interval
Inspection of ALL safety-related parts
Cleaning
Check or restore surface protection
Check tightness of hydraulic system
Check or restore surface protection or corrosion protection
Check or restore damage to paintwork and components
Check for or repair rust damage
Check or re-treat cavities and unpainted areas.
Check tightness of pneumatic system
Check strength of screws
Check, lubricate & adjust bearing clearance
Check wear parts
Check fluids (level, wear, contamination, quality)
Check & lubricate sliding surfaces
Remove internal dirt
Clean and check electrical components
Check engine and gearbox for function and wear
Check welds and construction
Perform visual inspection (according to inspection plan)
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 16.03.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
117