Skil 9295 Manual Del Propietário página 16

OPERATING INSTRUCTIONS
Slide On-Off Switch With Lock
The tool is switched "ON" by the switch button
located at the side of the motor housing. The
switch can be locked in the "ON" position, a
convenience for long grinding operations.
TO TURN THE TOOL "ON" without locking
it, slide the switch button forward by applying
pressure ONLY at the REAR portion of the
button. When pressure is released the switch
button will snap to "OFF" position (Fig. 5).
TO LOCK THE SWITCH "ON", slide the switch
button forward and press "IN" the FRONT
portion.
TO UNLOCK THE SWITCH, simply press and
release the REAR portion of the button. Switch
is spring loaded and will snap back automatically.
WARNING
Start the tool before applying to work and let the tool come to full speed before contacting the
workpiece. Lift the tool from the work before releasing the switch. DO NOT turn the switch "ON"
and "OFF" while the tool is under load; this will greatly decrease the switch life.
16
Hold the tool with both hands while starting the tool, since torque from the
motor can cause the tool to twist.
Fig. 5
Switch
Button