Techno Line WL 1045 Manual De Instrucciones página 11

data will be displayed in around 2 minutes. It takes around 30 minutes to have all
the CO readings stabilized.
2
If the AC power is interrupted, the monitor does not function, the display turned off.
The settings of your unit will be kept by the internal memory chip so your monitor
will function again after the AC power resumes.
Ventilation recommendation on the basis of CO concentration in the air
2
Your CO2 monitor measures and displays the CO in PPM with color ventilation
2
recommendations :-
CO value Chart display
2
over 2000 PPM
1501-2000 PPM
1001-1500 PPM
601 – 1000 PPM
400-600 PPM
The " " icon flashes when the current CO2 value exceeds 2000 ppm.
It also shows the ventilation icon " " if ventilation is recommended and needed.
To Set High-Low Alert of CO2
button, the CO2 digits "400" (default) flash and
1) Press and hold the
appears. Press the or the button to adjust the low alert level of CO2.
Press once to adjust +/- 10 PPM. Press and hold the button to accelerate setting in
fast speed. The lowest alert level is 400 PPM.
EN3