Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
BATTERy CHARGING
• Do not use any other battery chargers other than the one provided to charge this tool.
Charging the tool with a non manufacturer specified charger may result in fire or explosion.
• Ensure that the plug matches the outlet before use.
• The voltage range of the charger is 100-240V. Do not use this product with any outlets that do
not meet the minimum voltage requirements or exceed them.
Note: the battery is supplied partially charged. To ensure full capacity of the battery, completely
charge the battery in the battery charger before using your power tool for the first time.
CHARGING PROCEDURE (LED INDICATOR)
LED STATUS
Solid Red
Solid Green
Green light goes out once then the red light
blinks twice.
Green light goes out once then the red light
blinks three times.
Solid Green
W A R N I N G
Do not continue to press the on/off switch after the garden product has been automatically switched
off. The battery can be damaged.
• Plug the battery charger into a socket outlet and the charger plug into the socket on the rear
side of the handle.
• The charging procedure starts as soon as the charger plug of the battery charger is inserted
into the socket.
• The battery LED indicator indicates the charging progress. The indicator light will flash green
throughout the charging process. The indicator light will stop flashing and become a solid green
when the battery is fully charged.
• During the charging procedure, the handle of the garden product warms up. This is normal.
• Disconnect the power tool from the charger when not using it for longer periods.
DESCRIPTION
Battery is charging.
fully charged
Low voltage
Over current
Normal
11
Publicidad
