ATH-Heinl Cross Lift 40 Manual De Instrucciones página 91

7. Fastening by means of safety anchor
8. Adjustment of the lifting platform
a) Raise the lifting platform to a height of approx. 1000 mm.
b) Move the lift to the next notch position and make sure that both scissors are in the same notch (same
height).
c) Check the alignment of the lifting platform with the help of a spirit level, if necessary the lifting platform
can still be aligned by means of the built-in leveling screws.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 05.04.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
91