Electronic control for towel warmers.
CONNECTION TO THE FIL-PILOTE SYSTEM
(only for versions equipped with "Fil-Pilote")
E
N
G
SWITCH
With the "Fil-Pilote" function (class II), it can be remotely controlled with a control unit
that supports the "Fil-Pilote" system.
The brown wire is the phase (L), the grey wire is the neutral (N) and the black wire is
used to receive the Fil-Pilote signal.
DO NOT CONNECT THE BLACK WIRE TO EARTH.
STATION
"FIL-PILOTE"
66
CLEANING
- Disconnect the device from the mains before cleaning or maintenance.
- Use only mild, non-abrasive cleaning agents.
CORRECT POSITIONING OF THE THERMOSTAT
67
E
N
G