Descargar Imprimir esta página

Roger Technology H85/TDS Instrucciones Y Advertencias Para El Instalador página 23

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
POWER
H85/DEC
OFF
OFF
HOLD ON
L1
LIGHT UP
• Turn off the power;
• Press and hold the PROG key and simultaneously restore power (without releasing the PROG key). First, the L1 and
L2 LEDs go out and the A, B, C, D LEDs light up; subsequently, the L1 and L2 LEDs light up and the A, B, C, D LEDs
go out.
• Release the PROG key.
• Delete mode is activated and the L1 e L2 LEDs blink for 4 s.
Memory deletion using H85/DEC2 interface
To erase the memory using the H85/DEC2 interface, proceed as follows:
• Turn off the power;
• Press and hold the PROG key and simultaneously restore power (without releasing the PROG key). First, the A, B
LEDs light up; they then go out and the L1 LED lights up.
• Release the PROG key.
• Delete mode is activated and the L1, A and B LEDs blink for 4 s.
17
Advanced function: Code masking
WARNING! This feature is available for 6-digit user codes, to improve security when entering the code.
The mask function allows the real code to be "hidden" among digits entered at random.
The code will be read from the 6 digits entered immediately before the (*) star key.
E.g. user code 245672, output enabled OUT_ B.
N.B: by simply entering 245672 * * B, code is activated bypassing code masking funtion.
18
Indicators
ERROR ALERT H85/TDS KEYPAD
LR LED blinks rapidly 5 times
Intermittent buzzer
POWER
ON
PROG
PRESS
ON
AND
PROG
L2
RELEASE
POWER
H85/DEC2
OFF
PROG
OFF
PRESS
AND
HOLD ON
L1
LIGHTS UP
RELEASE
294862...308236 245672 * 057986...791964 * B
POSSIBLE CAUSE
Incorrect password
User coder not in memory
User code or password entered with fewer than 3 digits or more than 6
In code delete mode or change password mode: the codes entered do not match the
User code already stored.
Failure to enter * after the user code.
Digit entered incorrectly: # instead of *.
(
supported by the interface
A
B
C
D
A
LIGHT UP
L1
L2
BLINK for 4 s
POWER
ON
A
B
LIGHT UP
ON
PROG
L1
A
BLINK for 4 s
only) Attempt to store a user code on the C or D function key not
B
C
D
GO OUT
A
B
GO OUT
B
23

Publicidad

loading

Este manual también es adecuado para:

H85/decH85/dec2