Selco WFR 1000 CLASSIC Instrucciones De Uso página 24

2 INSTALLATION
Installation should be performed only by expert
personnel authorised by the manufacturer.
During installation, ensure that the power source
is disconnected from the mains.
2.1 Lifting, transport & unloading
- The equipment is not equipped with specific lifting ele-
ments.
Do not underestimate the weight of the equip-
ment: see technical specifications.
Do not move or position the suspended load
above persons or things.
Do not drop or apply undue pressure on the
equipment.
2.2 Positioning of the equipment
Keep to the following rules:
- Provide easy access to the equipment controls and connec-
tions.
- Do not position the equipment in very small spaces.
- Position the equipment in a dry, clean and suitably ventilated
place.
- Protect the equipment against pouring rain and sun.
2.3 Connection
The Selco mobile units are powered exclusively at low voltage.
24
2.4 Installation
Connection for MIG/MAG welding
Mounting bracket and cable bundle
"Consult the "Installation kit/accessories" section".
Installation