Titanium OfficeProfessional Plus A3 Manual De Instrucciones página 19

The laminator is provided with a reversing function in order to clear foil jams quickly.
1. If the foil jams, press the Reverse button.
2. The jammed foil is released and is fed out at the laminator infeed slot.
3. It will probably be necessary to then clean the unit several times as de-scribed in the Section
"Cleaning and Servicing".
4. If foil jams occur repeatedly or jammed foil cannot be removed from the laminator, please contact
the sales outlet where you purchased the de-vice (refer to Guarantee).
Deposits and residual adhesive on the transport rollers can in uence the results of the laminating process.
Therefore, the transport rollers must be cleaned regularly after use:
To do this, insert a folded piece of paper in the infeed slot. Residual adhe-sive is removed and taken up by
the paper when ejected. Repeat the pro-cess several times.
Disconnect the power plug before starting to clean the unit with a damp cloth. If necessary, the housing
can be cleaned using a cloth moistened with clean water with a little mild soap applied. Never use any
solvents or aggres-sive cleaning agents.
19