Zizito TOMMY Manual De Instrucciones página 3

1. HANDLEBAR INSTALLATION
2. INSTALLING THE AUXULUAR
WHEEL
Remove the plastic cover, nut and position
bracket separately. In turn, place the auxil-
iary wheel, the position support and the nut.
And make the position support stay in place
and tighten the nut (tighten the nut to 30 N.m
torque each).
3. SADDLE INSTALLATION
4. INSTALLING THE PEDALS
Use the special key and place the pedal marked R on the right crank. And in the same way put
the pedal marked L on the left crank.
ASSEMBLY
Release the hub and place the handlebars on the tube at the front
of the bracket. Adjust the depth to suit the handlebar direction. Make
sure the handlebars are centered when the bike moves forward.
Tighten the fixed cup and bushing until the handlebars cannot rotate
freely in the front fork (tighten the stem clamp bolt to 15 N.m of
torque).
Place the down tube in the bracket clamp, and adjust
the height, centering the direction of the saddle, and
tighten the nut (tighten the stem bolt to 15 N.m of
torque).
3