a)
Do not overload the device. Use tools that are suitable for the application. A
correctly selected product will do a better and safer job for which it was
designed.
b)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
c)
Disconnect the device from the power supply before adjusting, cleaning, or
servicing. This precaution reduces the risk of accidental start-up.
d)
Keep unused product out of the reach of children and anyone unfamiliar with
the device or this manual. Products are dangerous when used by
inexperienced users.
e)
Keep the product in good working order.
f)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
g)
To ensure the designed operational integrity of the appliance, do not remove
factory-installed covers or loosen screws.
h)
The appliance is not a toy. Cleaning and maintenance must not be performed
by children without adult supervision.
i)
Do not tamper with the device to alter its performance or design.
j)
Keep the unit away from sources of fire and heat.
k)
Never aim the high-pressure nozzle at people, animals, electrical equipment or
electrical wires. Doing so may cause personal injury or electrical shock.
l)
Never insert hands or fingers into the spray nozzle while operating the unit.
m) Never block spills with any part of your body.
n)
Beware of the recoil phenomenon when using the high pressure washer gun.
Always hold the high-pressure gun and nozzle with both hands. Hold the gun
and trigger with one hand and the nozzle with the other.
o)
Never operate the unit without the water line connected and the water flow
turned on. This may cause irreparable damage to the unit.
p)
Never use the unit with hot water.
q)
The appliance is designed to be used with the cleaning agent supplied or
recommended by the manufacturer. The use of other cleaning agents may
adversely affect the safe use of the device.
r)
Disconnect the plug from the outlet during any adjustments or maintenance
work performed on this device.
s)
Avoid accidental switching on. Do not move the unit while connected to power
with your finger on the switch. Make sure that the appliance switch is in the
"off" position when connecting the cord to the power supply.
t)
Do not move the unit by pulling on the high-pressure hose. Use the handle
located on top of the unit.
u)
Do not wipe plastic parts with solvents. Solvents such as gasoline, thinner,
benzene, alcohol, ammonia, or oil can damage plastic components. Clean
these parts with a soft cloth moistened with soap and water.