monzana DBWH003 Manual De Instrucciones página 11

The jack is not
holding the load
up, or the handle is
moving upwards.
The jack is not
lifting the load to
the maximum
height.
The jack cannot be
lowered
completely.
The jack does not
lift the load
smoothly, or it feels
spongy or loose.
TECHNICAL DATA
Art. no.
Model
Load-bearing
capacity
Lifting range (min.)
Lifting range (max.)
DISPOSAL
At the end of your item's long service life, please dispose of the valuable raw materials properly
so that proper recycling can take place. If you are not sure how best to proceed, the local waste
disposal companies or recycling centres will be happy to help.
The relief ball is not sealing
the hydraulic system, or the
oil is contaminated.
The hydraulic system is filled
with air.
The counter spring is broken.
The hydraulic system is filled
with air.
102817
DBWH003
2.0 t
135 mm
330 mm
Manually flush out the hydraulic
system by raising and then lowering
the lift arm. To do this, you must open
the relief valve.
Open the relief valve; quickly pump
the handle up and down with full force
to release the air. Then tighten the
relief valve again.
Replace the counter spring if it is
broken. Lubricate the joint shaft with
oil.
Open the relief valve; quickly pump
the handle up and down with full force
to release the air. Then tighten the
relief valve again.
102818
DBWH004
3.0 t
135 mm
400 mm
11
107243
FWH001
2.0 t
85 mm
330 mm
www.DEUBAXXL.de