monzana DBWH003 Manual De Instrucciones página 8

Do not overload the jack. Pay attention to the jack's specified maximum load-bearing
•
capacity.
Do not leave the jack and the load unattended throughout the work.
•
When working under the vehicle, also secure the vehicle with suitable chassis stands. Work
•
may not be performed on the vehicle without such chassis stands.
Centre the load on the terminal before lifting the load.
•
Some vehicles require an adapter so that their vehicle can be correctly connected to the
frame to subsequently lift their vehicle.
Do not move your vehicle while it is on the jack.
•
This product must not be used to lift people.
•
Do not overload the product by holding a load continuously. This can cause personal injury
•
and product damage.
When using the jack in the event of a breakdown or accident, be aware of your surroundings
•
and do not act negligently. Before lifting a vehicle, comply with all the regulations and have
another person supervise you.
There are always residual risks – such as the risk of crushing or vehicle slippage – which can
•
lead to serious injury.
Jacks are to be maintained and repaired in accordance with the manufacturer's instructions.
•
Such maintenance and repair must be carried out by qualified individuals.
Store the jack in a dry place and out of the reach of children. Do not leave the jack unattended
•
when it is not in use.
Warning
Dangers can arise from this device if it is used improperly or for an unintended purpose by
untrained individuals! Observe the staff qualifications!
Warning
The device is not a toy and should not be handled by children.
Attention
Observe the specified load-bearing capacity
Only use the product on level ground!
Secure your vehicle with support blocks!
Secure your vehicle against rolling away!
8 www.DEUBAXXL.de