Descargar Imprimir esta página

Emerio KM-123117 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
KM-123117
PARTS DESCRIPTION
1. Protective splatter cover
2. Food inlet
3. Speed Selector
4. Tilt button
5. Whisk
6. Beater
BEFORE FIRST USE
All parts of the appliance are to be thoroughly cleaned before being used for the first time.
Before assembling the mixer, be sure the power cord is unplugged from the power outlet and the speed
selector is in the position "0".
Press the tilt button and the mixer head will be popped up into its tilted position. To make it back to the
level position, you should use one hand to press the tilt button and press down the mixer head with another
hand.
After lifting up the mixer head, fit and rotate the protective splatter cover clockwise onto the mixer head.
Select the desired accessory (dough hook/ beater/ whisk), which is depending on the mixing task to be
performed. Align accessory connector with the output shaft. Push and rotate the accessory to make the pin
on the output shaft stuck in accessory connector, thus the accessory is firmly locked.
Fit the mixing bowl onto the mixer base having the grooves aligned. Turn the bowl clockwise to have it
locked securely in position.
USE
Ensure that the speed selector is in the position "0" and the appliance is unplugged.
Add the ingredients (< 60℃) into the mixing bowl. Do not overfill the bowl.
Press the tilt button and release the mixer head from its tilted position. Close the mixer head firmly.
Insert the power cord into a suitable power outlet.
Turn the speed selector to your desired setting. Always begin mixing at a lower speed setting to prevent
splattering. To protect the motor, different accessary has different max speed setting, which is marked
around the speed selector. Do follow these max speed settings when operation. To know more about the
specific use of each accessory, check below "MIXING GUIDE" as a reference.
Do not operate for more than 6 minutes at a time. Stop and cool for 1 minute. This is one cycle of use. After
3 cycles of use, please allow the appliance to have a rest for approximate 20 minutes. Otherwise, the unit
7. Dough hook
8. Accessory connector
9. Mixer head
10. Mixing bowl
11. Base
12. Output shaft
- 5 -
EN

Publicidad

loading