LAVAZZA EP MAXI 1050 DUAL Instrucciones De Empleo página 16

EN
DISPENSING THE DESIRED QUANTITY OF
COFFEE
Position the cup
1
in the centre of the rack.
Lift the cartridge load lever and insert the car-
2
tridge in the slot.
If the cartridge does not enter, empty the used
cartridge/drop collection drawer
NANCE).
Lower the cartridge load lever.
3
Always use the grip.
Do not put your fingers
or other objects
in the cartridge slot.
Press one of the two dispenser buttons: the
4
power light will flash.
When you have the desired quantity of coffee
5
in your cup press the coffee dispenser button
again to stop the machine.
PREPARING COFFEE
4
(see MAINTE-
5
4
PROGRAMMING COFFEE SERVINGS
Before programming, dispense at least one coffee
in order to fill the hydraulic circuit – to dispense a
DISPENSING THE DESIRED QUAN-
coffee see
TITY OF COFFEE.
The serving is programmed using the same button;
the use of any other button will be ignored. The de-
sired quantity of coffee programmed (minimum 30
cl) can be modified by repeating the programming
process. If a serving of less than 30 cl is memorised,
the machine will memorise 30 cl in any case.
Carry out steps 1, 2, 3 of the paragraph
ING THE DESIRED QUANTITY OF COFFEE
Press and hold down one of the two coffee dis-
penser buttons for at least 3 seconds. The ma-
chine will emit an acoustic sound and the on
switch will come on. At this point release the
button.
When you have the desired quantity of coffee
in your cup press the same button to finish the
serving.
If programming does not take place within a maxi-
mum of 1 min 50 secs, the machine automatically
stops serving coffee and emits an acoustic warn-
ing. The most recent serving quantity programmed
will remain in the memory. If there is a power failure
while programming is taking place, the most recent
amount programmed will remain in the memory.
DISPENSING DOSED COFFEE
Carry out steps 1, 2, 3 of the paragraph
ING THE DESIRED QUANTITY OF COFFEE
Press one of the two dosed coffee dispenser but-
tons (if programmed). The machine will auto-
matically stop dispensing when the programmed
quantity of coffee has been reached.
If there are anomalies during the dispensing of
the dosed coffee, the machine will continue to dis-
pense the coffee in free dosage mode and emit an
acoustic warning. The serving can be interrupted
by pressing the button again.
DISPENS-
DISPENS-