NOTICE
In the future use of refrigerator, doors uneven phenomenon may occur to the
weight of stored food. Then please adjust according to the above methods.
Installation
3.
The stability can be checked by alternately
bumping on the diagonals. The slightly
swaying should be the same in both
directions. Otherwise the frame can warp;
possible leaking door seals are the result.
A low tendency to the rear facilitates the
closing of the doors.
Fine tuning of the doors
If the doors are not in one level, this mismatch
can be remedied by following:
A) Using adjustable foot
Rotate the adjustable foot according to the
direction of arrow to turn up or down the foot.
EN
35