Publicidad
Idiomas disponibles
Idiomas disponibles
DST – Daylight saving time
Press >>/DST button (4) and hold for 3 seconds to toggle on and off
DST function.
RADIO OPERATION
- Press the on/off button (12) to turn radio on.
- Select AM/FM band press the AM/FM band button (11).
- Select the station using the Tuning knob (8).
- Turn the volume knob (7) to adjust volume as required.
- Press the on/off button (12) to turn radio off.
Note :
- The AM band use an internal directional aerial, rotate the radio for
best reception.
- Ensure that the FM antenna (23) is completely unrolled and
extended for best FM reception.
SPECIFICATIONS
Frequency :
Battery backup :
Power source :
RESET
- The reset button (20) is located on the back of unit. Use a ballpoint
pen to press it whenever you change the batteries, or unit is not
performing as expected. This will return all settings to default value,
and you will lose any stored data (alarm and clock settings).
PROJECTION UNIT
- Focus setting : adjust the projection clock brightness / focus by
turning the brightness / focus adjustment wheel (18) until the
projected time is clearly shown on the ceiling or wall.
- To flip projected image by 180°, press 180° flip button (14).
NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A
DARKENED ROOM.
MAXIMUN PROJECTION DISTANCE IS 3-9 FEET.
Alarm battery back-up system
This clock radio includes a alarm battery back-up circuit that can
AM 540 – 1600 kHz
FM 88 – 108 MHz
1 x CR2032 flat lithium battery
AC230V ~ 50Hz, 5W
Publicidad
