Descargar Imprimir esta página

Matfer 121164 Instrucciones De Uso Y Mantenimiento página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTRUCTION FOR USE
- Check if the power supply is normal and makes sure the power supply voltage corresponds
with the machine's voltage.
- The fryer 1 tank and 2 tanks have the same principle of
two independent selectors of temperature.
- There is an oil level indicator in the inner side of the tank; oil should be poured depending on
amount necessary.
Maximum volume is marked by "MAX" and the minimum volume marked
by "MIN". Do never exceed the maximum level : overflow risk !
- Plug-in to start operating, a green indicator light will turn on.
- Turn the thermostat clockwise to the desired level. A yellow indicator light will turn on and
the
green indicator light will go off simultaneously, therefore the heating elements begin
to work and oil temperature will rise.
- When oil temperature rises to the set level, the controller will cut off the power supply
automatically.
- Once oil temperature lowers, the controller will give power again automatically. The yellow
indicator will turn on and green indicator will go off, heating elements will begin to heat up
again and oil temperature will rise. The machine will do this repeatedly to make sure oil
temperature is constant at the set level.
- The tank cover is designed to keep it clean and warm. When covering the tank, please
make sure there is no water on the cover in case it drips into the oil.
- There is a hook and handle on the Clip-On Frying Basket for smaller foods. Drop the baskets
into oil pot, lift them up once they are done and hang them on top of the tank to let the
oil drip out.
- After operation turn the switch to «off» position and unplug the power cord cut off the
power supply.
SPECIAL INSTRUCTIONS
- Before using the cooker for the first time, please read the instructions manual carefully.
- The machine must be placed on a flat surface in a ventilated area and away from
flammable products.
- When the machine is working, do not touch the high–temperature parts.
- Before stopping the machine, make sure that the regulation and power are switched
off.
- Be sure the machine temperature is at the room temperature before start to clean up
the machine.
- Don't wash it directly with water to avoid electric leakage and component damage.
ENGLISH
operation.The fryer with two tanks has

Publicidad

loading

Productos relacionados para Matfer 121164

Este manual también es adecuado para:

121166121168121178121182