Publicidad
Idiomas disponibles
Idiomas disponibles
EN
ADJUSTING HEADGEAR
(FOUR PARTS)
1.1. Headgear Top (See
adjustment"W"in Fig. 4)
Adjusting headgear for proper
depth on the head to ensure correct
balance and stability.
1.2. Headgear Tightness(See
adjustment "Y"in Fig. 4)
Pressing the adjusting knob located
on the back of the headgear and
turn left or right to a desired
tightness.
DIMMING TABLE
1.3. Distance Adjustment(See
adjustment "Z" and "T" in F ig.4)
Adjusting the distance between the
face and the lens by loosening both
outside tension knobs and press
inward to free from adjustment
slots. Move forward or back to
desired position and retighten.
(Both sides must be equally
positioned for proper vision.)
1.4. Angle Adjustment(See
adjustment "X" in Fig.4) Four pins
on the right side of the headgear top
provide adjustment for the forward
tilt of the helmet. To adjust, loosen
the right outside tension adjustment
knob then lift on the control arm tab
and move it to the desired position
and retighten tension adjustment
knob.
13
Publicidad
