Volpi V-BLACK VITA Manual De Uso página 17

•
Use the sprayer in well airy and illuminated areas, not windy or shady.
•
Do not use the sprayer upwind.
•
Use the sprayer at least 6mt away from people or animals.
•
Keep the sprayer far from children and domestic pets; do not spray close to fish aquariums.
•
Do not eat treated fruits or vegetables before the date foreseen by the chemical product manufacturer and, in any case,
wash them very carefully.
•
Do not pressurize by means of under pressure devices.
•
Do not disperse the remaining chemical solutions in the environment.
•
After using the sprayer, carefully wash hands, face and clothes.
•
Do not leave the sprayer out in bad weather conditions.
•
The user is responsible for the fact that the sprayer is maintained at optimal operating conditions so the sprayer can
function in a proper and safe way. Parts and accessories of the equipment must be replaced when they no longer assure a
correct function of the sprayer.
3.2. PROHIBITIONS
•
It is forbidden to modify the sprayer's parts.
•
It is forbidden to apply devices or accessories to the sprayer without the authorization of
•
It is forbidden to use solvents, such as alcohol, gasoline solvents or thinner, for the cleaning of the sprayer.
4. TRANSPORT AND HANDLING INSTRUCTIONS
The transport of the sprayer must be realized using all the necessary cautions in order to avoid damages.
When transporting the sprayer please make sure the switch on/off is always off.
During transport, the tank must always be empty or, if not possible, safely fixed in order to avoid accidental outpours of liquid.
During transport and storing, do not put the sprayer on or under other material.
When moving the sprayer, it is recommended to avoid bumps, which could damage the product.
5. INSTRUCTIONS FOR USE
5.1. SETTING OF THE SPRAYER
•
Insert the locking nut D1 onto delivery hose D.
•
Insert delivery hose D onto hose holder D2
•
Insert the hose holder D2 into the housing of the base A 23VBE12) B (23VBE16).
•
Screw the locking nut D1 onto the base all the way down and tighten firmly.
•
Unscrew the locking nut D1 from the handle E.
•
Insert the locking nut D1 onto the delivery hose D.
•
Insert the delivery hose D onto the hose holder D2.
•
Screw the locking nut D1 onto the handle E.
•
Screw the lance F (23VBE12) G (23VBE16) onto the handle E
•
Screw the brass sprayer F1 onto the lance F (23VBE12) G (23VBE16).
DAVIDE E LUIGI VOLPI S.p.A. - Via San Rocco,10 - 46040 CASALROMANO (MN) – ITALY
DAVIDE E LUIGI VOLPI S.P.A.
pag. 17 di 80