IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
!
• For dusty operations, wear dust mask.
• Do not move or carry Air Mover when it is operating.
• Only operate on a level and stable surface to prevent the
Air Mover from falling and possibly causing injury or
damage to unit.
Observe the following warnings that appear on the
motor housing of your Air Mover:
WARNING
!
To reduce the risk of fire, electric shock or injury:
• Keep dry, do not expose to rain, water, other
liquids, or immerse in or use in standing water.
• Use only with GFCI-protected outlets.
• This Air Mover has an automatic motor shutoff
device; it may restart without notice. To reduce
the risk of injury, unplug before servicing.
• Do not use an extension cord with this air
mover.
MOTOR SPECIFICATIONS AND ELECTRICAL
REQUIREMENTS
This Air Mover is provided with a 3-speed, 120 volt,
60 Hz induction motor with a grounding conductor.
It is thermally protected and will automatically shut
down if over-heated. Once it cools, the motor will
restart automatically if not unplugged.
In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current
to reduce the risk of electric shock.
SP7019-2 AIRMOVER ESF.indb 3
SP7019-2 AIRMOVER ESF.indb 3
:
3
WARNING
!
TO REDUCE THE RISK OF TIP-OVER DURING
STORAGE, STACK 2-HIGH ONLY.
WARNING
!
Do not exceed 8 Amps through the on-board
convenience outlets (AM22871 & AM22881).
This Air Mover is equipped with an electric cord having
an equipment grounding conductor and a grounding
plug. The plug must be plugged into a matching outlet
that is properly installed and grounded in accordance
with all local codes and ordinances.
Do not modify the plug provided. If it will not fit the
outlet, have the proper outlet installed by a qualified
electrician.
:
:
5/18/21 9:57 AM
5/18/21 9:57 AM