RIDGID AM25601 Manual Del Usuario página 6

STORAGE
When stacking units, position the four foot bumpers on
the recessed stacking pads.
The units conveniently "stack" for storage, as shown,
no more than two (2) units high.
PREFERRED POSITION (Fig. 5)
(Your Unit May Not Be As Illustrated)
MAINTENANCE
CORD MAINTENANCE (Fig. 7)
When use is complete, unplug the power cord and
wrap it around the cord wrap area as shown. If the
power cord is damaged, it must be replaced by the
manufacture or their service agent or by qualified
personnel in order to reduce the risk of accident.
(Your Unit May Not Be As Illustrated)
SP7019-2 AIRMOVER ESF.indb 6 SP7019-2 AIRMOVER ESF.indb 6
Fig. 5
Cord Wrap
Fig. 7
Area
Power
Cord
CAUTION
!
Do not operate Air Mover when stacked on top of
each other.
Do not stack more than 2 high.
ALTERNATE POSITION (Fig. 6)
(Your Unit May Not Be As Illustrated)
STORAGE
Before storing your Air Mover, the power cord should
be wrapped around the unit. The Air Mover should be
stored indoors.
CLEANING YOUR AIR MOVER
Unplug the power cord before cleaning. If the
polypropylene housing becomes soiled it may be wiped
off with a damp cloth. Keep dry, never splash or spray
the unit with water or cleaning solutions. Make sure
inlet grills, exhaust grille and blower wheel surfaces
remain clean of dust and dirt build-up.
WHEELS (AM25601 & AM22881)
If your wheels are noisy, you may put a drop of oil on
the roller shaft to make them quieter.
6
:
Fig. 6
5/18/21 9:57 AM 5/18/21 9:57 AM